new_horizon
05-07 08:36 AM
I don't think you should make it a big deal. I know it hurts you and your family to see PD question you, but they were doing their job based on someone's complaint. Moreover you don't want to complicate matters, and put you in the spotlight for nothing.
I am sure the gods will be more forgiving on these ignorant officers, and so should you.
I am sure the gods will be more forgiving on these ignorant officers, and so should you.
wallpaper mi amore tattoo. mi tattoo.. representa mi amor por la musica hardcore punk
inskrish
09-21 01:48 AM
When my labor certification was stuck at backlog elimination center, i was hoping that LC does not stand for "Lost Case" and now for some fre**king reason my early 2004 EB2 case is not being picked up when later cases are being approved, now I hope that GC does not stand for "Gone Case".
I can understand your frustration, NKR, but sure you will get your turn by Feb.09.
I can understand your frustration, NKR, but sure you will get your turn by Feb.09.
vparam
05-23 01:49 AM
Mchundi,
I understand your anxiety. To answer your questions:
There is no chance of having any single set of provisions "become law immediately."
Unfortunately, we have to let this current round of discussions on CIR play out. What should we root for? That amendments to the current CIR that basically gut the bill fail. If the bill survives these amendments then we stand a good chance of succeeding in our efforts.
For strategic reasons, we cannot disclose everything we know about behind the scenes agreements.
Hang in there!
best,
Berkeleybee
- Why is it not possible for IV to convince brownback or cronyn to support in a amedment that backlog reduction section for legal immigrants could take effect immdiately. it looks like for legal immigrants except for sen.session no one opposes any provision.
Thanks
vikram
I understand your anxiety. To answer your questions:
There is no chance of having any single set of provisions "become law immediately."
Unfortunately, we have to let this current round of discussions on CIR play out. What should we root for? That amendments to the current CIR that basically gut the bill fail. If the bill survives these amendments then we stand a good chance of succeeding in our efforts.
For strategic reasons, we cannot disclose everything we know about behind the scenes agreements.
Hang in there!
best,
Berkeleybee
- Why is it not possible for IV to convince brownback or cronyn to support in a amedment that backlog reduction section for legal immigrants could take effect immdiately. it looks like for legal immigrants except for sen.session no one opposes any provision.
Thanks
vikram
2011 mi amore tattoo. mi amor
when
02-29 10:23 AM
The online status shows a date Sept, but my app was received in July. Is that normal?
more...
sury
11-15 04:17 PM
can anyone reply on this..!!
TeddyKoochu
01-06 10:11 AM
Hey Teddy,
During you process for porting from EB3 to EB2 did you:
1. Do this within the same organization after getting your advanced degree?
2. Did you have to file for a new PERM and start from the begineeing under EB2?
3. Were you successfully able to port your PD or did you start with a new PD under EB2?
Hi Harry mine was an EB2 case to begin with, no porting. Only this is my timing was not correct and I missed the Jul 07 window, the labor filing took way too long. So kind of in the same boat as you, trying to find legal avenues to upgrade to EB1. Let�s wait for some advice to come by. Looking at your case as well I believe that EB1-A is the only option.
During you process for porting from EB3 to EB2 did you:
1. Do this within the same organization after getting your advanced degree?
2. Did you have to file for a new PERM and start from the begineeing under EB2?
3. Were you successfully able to port your PD or did you start with a new PD under EB2?
Hi Harry mine was an EB2 case to begin with, no porting. Only this is my timing was not correct and I missed the Jul 07 window, the labor filing took way too long. So kind of in the same boat as you, trying to find legal avenues to upgrade to EB1. Let�s wait for some advice to come by. Looking at your case as well I believe that EB1-A is the only option.
more...
meridiani.planum
08-12 05:40 PM
if your applications are pending for over 6 months (approvable and your PD isc urrent for this long), file a writ of mandamus. Thats the only thing I have seen that moves USCIS to approve such old applications that are hiding behind the 'under background check' flag. Note that FBI namecheck is also now required to be completed within 180 days, so there is no excuse for an application to remain approvable but not approved beyond those timelines. talk to a good lawyer and pursue your case aggressively.
2010 mi amor tattoos
FredG
August 27th, 2004, 08:57 AM
I'm with Don.. although I have a camera in phone, it's got less resolution that a hungover coke bottle dipped in vaseline jelly peering through the polar ice cap after a three night binge on beer, whisky and crack. ...
resolution lower than a cockroaches left testicle and more shakey than a sneezing 99 year old geriatric having a seisure.....Rob, What have you been eating? :D
resolution lower than a cockroaches left testicle and more shakey than a sneezing 99 year old geriatric having a seisure.....Rob, What have you been eating? :D
more...
GumI485
05-14 07:34 PM
We will keep working on this Retrogression issue...
We will fully support IV Core Group in their efforts
Congratulations! to all those who are eligible to apply I-485, but please keep supporting IV's main agenda.
We will fully support IV Core Group in their efforts
Congratulations! to all those who are eligible to apply I-485, but please keep supporting IV's main agenda.
hair Te+amo+mi+amor+tattoos; mi amore tattoo. mi amore vole f . mi amore
jeny
08-06 08:39 AM
Yes Jayant it is Consular Process. Today i send a mail to them, hope they will replay.
Thanks
I just recived mail from embassy saying that there is no visa avilable for my case. When avilable they will call me for the interview again. Thank you ALL
Thanks
I just recived mail from embassy saying that there is no visa avilable for my case. When avilable they will call me for the interview again. Thank you ALL
more...
brij523
02-17 08:16 AM
Good job Varsha.
As promised I have prepared the list of 110th congress member and send to Himanshu. Hope he likes the format.
I am working on getting appointment with our congress member - John Barrow of GA.
Based on the list I prepared, it seems maximum number of congress member come from NY,NJ,FL,CA,TX,IL. So I think member from these states have to be more active.
As promised I have prepared the list of 110th congress member and send to Himanshu. Hope he likes the format.
I am working on getting appointment with our congress member - John Barrow of GA.
Based on the list I prepared, it seems maximum number of congress member come from NY,NJ,FL,CA,TX,IL. So I think member from these states have to be more active.
hot 2010 pictures amor tattoo
srikondoji
01-25 04:05 PM
http://timesofindia.indiatimes.com/Bush_wants_more_young_Indian_minds_in_United_State s/articleshow/1461553.cms
This is very promising and can help our IV team to press on for relief provisions for Skilled workers already here.
Good luck to us all.
This is very promising and can help our IV team to press on for relief provisions for Skilled workers already here.
Good luck to us all.
more...
house tattoo amor ordinem nescit
desidas
01-23 08:28 PM
Ramba,
Please advise
I dont work for my GC Sponsoring employer anymore and I dont have H1B either
Will it be any issue at Port of Entry if they ask why I am not working from my GC employer anymore?
I changed jobs using AC-21 and working on EAD now and H1B not valid anymore
Please advise
I dont work for my GC Sponsoring employer anymore and I dont have H1B either
Will it be any issue at Port of Entry if they ask why I am not working from my GC employer anymore?
I changed jobs using AC-21 and working on EAD now and H1B not valid anymore
tattoo mi amore vole fe tattoo. what
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
more...
pictures mi amore vole fe yah tattoo
gcwait2007
12-25 05:55 PM
Your PD does not have to be current (it changes from month to month), if it was current at some time in the past, that will be enough.
Fight for your rights!
Hello lazycis,
I have a quick question. Many of our PD were current in July 2007. If our names are stuck in FBI name check for 2 yrs, can we file for WoM? Please advise. Many of us are under the impression that the our PD dates have to be current at the time of WoM and our namecheck should be stuck at FBI atleast for 1 year during which the PD date is current. In other words, the PD date should be current over a period of 12 months at the time of filing WoM.
Q 2. Is there any limit countrywise, for issuing GC?
Thanks in advance.
Fight for your rights!
Hello lazycis,
I have a quick question. Many of our PD were current in July 2007. If our names are stuck in FBI name check for 2 yrs, can we file for WoM? Please advise. Many of us are under the impression that the our PD dates have to be current at the time of WoM and our namecheck should be stuck at FBI atleast for 1 year during which the PD date is current. In other words, the PD date should be current over a period of 12 months at the time of filing WoM.
Q 2. Is there any limit countrywise, for issuing GC?
Thanks in advance.
dresses mi amor tattoos. mi amor
MetteBB
06-06 02:53 PM
Awesome 3 of my 36 stamps got in :P
But seriously, i wish you put in my pink nebula one! oh well! :)
3 out of 44 is not bad, so no complaining ;)
/mette
But seriously, i wish you put in my pink nebula one! oh well! :)
3 out of 44 is not bad, so no complaining ;)
/mette
more...
makeup girlfriend mi amore vole fe
amitjoey
02-01 04:45 PM
Congrats!
girlfriend mi amore vole fe yah. mi amore
Lill
03-03 05:31 AM
so photoshop isnt alowed? Just wondering. if not ill just do it in Flash i guess
hairstyles Mi Amore Tattoo
mugwump
12-07 02:57 PM
Yes.
I think you can take classes (online or even regular in-class) as long as you maintian your primary H1B status - i.e. continue to work with the employer on the specified job/number of hours etc.
(note: I am not a lawyer)
If you are taking online classes, why would your status matter?? i understand you need to have legal status to take regular (in-class) courses, but dont really feel an online university would really care. when you can pretty much log in from any where in the world, why would they worry about you being here illegally?
just my opinion.
I think you can take classes (online or even regular in-class) as long as you maintian your primary H1B status - i.e. continue to work with the employer on the specified job/number of hours etc.
(note: I am not a lawyer)
If you are taking online classes, why would your status matter?? i understand you need to have legal status to take regular (in-class) courses, but dont really feel an online university would really care. when you can pretty much log in from any where in the world, why would they worry about you being here illegally?
just my opinion.
rkrishna123
10-17 03:10 PM
Thanks Vamsi for your advice....I have not checked with the CIS yet...i will do now. Thanks for your time
ajcates
03-08 12:06 AM
I use notepad, so I think we should have a notepad forum.
No comments:
Post a Comment